Huachai's products mainly include 125 series B/FL413, 513 air-cooled diesel engines, 132 series BFM1015, TCD2015, TCD12.0/16.0 and other water-cooled diesel engines produced by Deutz Germany technology
413/513 Series
B/FL413F series air-cooled diesel engine is a high-speed four-stroke, V-type, 90° cylinder row angle, direct injection ω-type (or inclined cylinder type) combustion chamber and two-stage combustion system. It adopts gantry crankcase and one cover structure for each cylinder. The crank connecting rod structure is a multi-support three-layer alloy sliding bearing, and the middle thrust crankshaft. Side-by-side connecting rods and oil-cooled pistons with three sealing rings. On the basis of inheriting the advantages of B/FL413 series air-cooled diesel engine, the B/FL413 series air-cooled diesel engine has been targeted to improve the problems found in the use of B/FL413 series air-cooled diesel engine, and the application of new technologies has been increased in a timely manner according to technological progress.
Technical Parameters:
Rated power (kW) Max : 110-243kW
Compression ratio: 15.8
Maximum discharge temperature °C: 450±30
Air intake at 25°C/1000mbar (m³/h): 830-1500
Displacement (m³/h): 2255-4085
Cooling air volume (m³/h): 7810-9310
Engine data
Dry weight: 920kg
Maximum engine length: 1200mm
Maximum engine width: 1040mm
Maximum engine height: 915mm
Bore: 125mm
Stroke: 130mm
Compression ratio: 15.8
Direction of rotation (from the flywheel end): counterclockwise
Flywheel Housing Specifications: SAE1
Flywheel Size: 11.5" or 14"
Number of flywheel teeth: 167
Engine support: Rigid support
Maximum noise level at 1m (left and right sides of the engine): ≤94 dBA
Battery voltage: 24V
Starter motor rated power: 9kW
Generator capacity: 55A
Generator voltage: 28.5V
Maximum exhaust back pressure: 75mbar
Maximum allowable inlet resistance: 50mbar
Lubrication system
Minimum oil pressure at rated point (oil temperature 90°C): ≥3.25bar
Minimum oil pressure at 600 rpm (oil temperature 90°C): ≥1 bar
Normal operation oil temperature: <130°C
Fuel consumption rate: 0.5% of < fuel consumption
Oil pan sump: Fan end
Oil pan tilt angle: 45°(Max)
Initial oil fill: 28L
Oil Filter Cartridge Type: Disposable Paper Filter
Number of oil filter : 2
Cold-start system
Minimum ambient without assisted cold start (standard): -7°C
Minimum ambient temperature for cold start with flame gimmer plug: -32°C
Fuel system
Cylinder ignition sequence: 1-8-4-5-7-3-6-2
Idle speed: 600±50rpm
Diesel Filter Element Type: Disposable Paper Filter
Number of diesel filter : 2
Power Curves
External Dimensions:
Industrial Engine
High degree of serialization, good versatility, less maintenance spare parts reserve, easy to maintain and repair;
The engine adopts a V-shaped structure, which shortens the axial size and reduces the overall height;
It has excellent low-temperature performance, and the minimum starting temperature can reach -32°C;
It can adapt to 24-hour full-load work, harsh working conditions, and can operate reliably in the high-temperature Gobi desert and desert.
The plateau has good adaptability and meets the working conditions of 5000m above sea level;
High power density, wide range of power speeds, and high torque reserve coefficient;
Application:
Material Handler, Beam Carrier, Rotary Drilling Rig, Rail Grinder, Wheel and Orbital Gantry Cranes
, Ballast Regulator, Self-Propelled Modular Transporter, Cotton Picking Machine, Rail-Laying Machine,