Huachai's products mainly include 125 series B/FL413, 513 air-cooled diesel engines, 132 series BFM1015, TCD2015, TCD12.0/16.0 and other water-cooled diesel engines produced by Deutz technology from Germany
Generator diesel engines
Engine Model: BF8L513C / BF8L513 / F8L413F
Prime power (kW/rpm): 176/1500; 147/1500; 117/1500;
Unit power(kW/rpm): 150/1500; 120/1500; 90/1500;
Configuration Description: With muffler, air filter, fan, remote electronic governor
Main technical features:
* High degree of systematization, which is convenient for the serialization of unit manufacturers' products, reduces the workload and cost of design and development, and reduces the type and quantity of spare parts stored by end users
* Direct start-up at -17°C without any auxiliary device; The addition of a flame preheating auxiliary start device can be directly activated at -32°C
* The use of 4-valve technology, high injection pressure fuel injection system, improve the combustion of diesel engine, better fuel economy;
* Matched with silicone oil coupler deformed nylon fan, low noise, help to match the unit's silent box;
* Good adaptability of the plateau, meeting the working conditions of 5000m above sea level
* The crankshaft uses staggered technology, which makes the engine run more smoothly and the power generation quality is higher;
413/513 Series
B/FL413F series air-cooled diesel engine is a high-speed four-stroke, V-type, 90° cylinder row angle, direct injection ω-type (or inclined cylinder type) combustion chamber and two-stage combustion system. It adopts gantry crankcase and one cover structure for each cylinder. The crank connecting rod structure is a multi-support three-layer alloy sliding bearing, and the middle thrust crankshaft. Side-by-side connecting rods and oil-cooled pistons with three sealing rings. On the basis of inheriting the advantages of B/FL413 series air-cooled diesel engine, the B/FL413 series air-cooled diesel engine has been targeted to improve the problems found in the use of B/FL413 series air-cooled diesel engine, and the application of new technologies has been increased in a timely manner according to technological progress.
B/FL413F/513 technical parameters
Basic parameters
Dry weight: 920kg
Maximum engine length: 1200mm
Maximum engine width: 1040mm
Maximum engine height: 915mm
Bore: 125mm
Stroke: 130mm
Compression ratio: 15.8mm
Direction of rotation (from the flywheel end): counterclockwise
Flywheel Housing Specifications: SAE1
Flywheel Size: 11.5" or 14"
Number of flywheel teeth: 167
Engine support: Rigid support
Maximum noise level at 1 m (left and right sides of the engine): ≤94dB
Battery voltage: 24V
Starter motor rated power: 9kw
Generator capacity: 55A
Generator voltage: 28.5V
Maximum exhaust back pressure: 75mbar
Maximum allowable inlet resistance: 50mbar
Lubrication system
Minimum oil pressure at rated point (oil temperature 90°C): ≥3.25bar
Minimum oil pressure at 600 rpm (oil temperature 90°C): ≥1 bar
Normal operation oil temperature °C <130
Fuel consumption rate< 0.5% of fuel consumption
Oil pan sump: Fan end
Oil pan tilt angle: 45°(Max)
Oil Filter Cartridge Type: Disposable Paper Filter
Number of oil filter cartridges: 2
Cold-start system
Minimum environment without assisted cold start (standard): -7
Minimum ambient temperature for cold start with flame gimmer plug: -32
External Dimensions:
